Sump Pump Calgary, AB
A new sump pump in Calgary runs about $1,500 to $3,000 installed. Swapping a pump in an existing pit runs about $600 to $1,200.
A new sump pump in Calgary, with pit, discharge pipe and check valve, runs about $1,500 to $3,000. Replacing a pump in an existing pit costs about $600 to $1,200. Adding a battery backup costs about $400 to $1,000. A sump pump collects groundwater from the drain around your foundation and pushes it out of the house. That keeps the basement dry. The rule that catches people out is where the water goes. Foundation drainage cannot go into the City's sanitary sewer. Prices by job are in sump pump cost in Calgary.
Directory · 1 company
Well-reviewed sump pump companies in Calgary
Tap one to open its Google listing, with phone number, hours and recent reviews.
-
View on Google
Jack'd Up Plumbing
Small local Calgary plumber: drain cleaning, sump pumps and water heaters.
What a Calgary Sump Pump Job Involves
- Pump swap: the pit and discharge line already exist and only the pump and check valve are replaced.
- New pit and pump: the floor is cut, a pit and liner are set, and a discharge pipe runs outside. Older homes may have no pit at all, which means cutting concrete.
- Battery backup: a second pump or a battery system that keeps pumping when the power fails, which is often when the storm hits.
- Discharge and check valve: the pipe that carries water out of the house, and the valve that stops it running back into the pit.
Signs You Need a New Sump Pump
- The pump is more than about 10 years old. The City of Calgary says to replace a sump pump every 10 years or sooner.
- It runs constantly, never runs, or makes grinding or rattling noises.
- Water sits near the top of the pit, or the basement floor is damp after rain or snowmelt.
- You have no backup and your area loses power in storms.
The City advises checking a sump monthly and having the pump serviced regularly.
Repair or Replace
A pump alone costs about $150 to $600 (a pedestal pump $150 to $300, a submersible $300 to $600), so most of the bill is labour. A stuck float or loose connection is worth fixing. A pump past 10 years, or one that has failed more than once, is usually cheaper to replace than to keep repairing, and you can add a backup at the same visit.
Calgary Rules: Where the Water May Go
The City of Calgary's lot drainage guide says foundation drainage cannot be discharged into the City's sanitary sewer. It must discharge to the surface or to the City's storm system.
- Penalty: under the City's drainage bylaw a conviction can bring a fine of up to $10,000, or up to one year in jail, or both, for each day the offence continues.
- Distance: pipes may not end within 2 m of a street, reserve or surface drainage facility unless authorised, so the discharge should run away from the building and toward your lot's front or rear.
- Freezing: the City says to prevent discharge pipes freezing, and to avoid sending water onto hard surfaces that turn slippery.
- Extensions: eavestrough and downspout water should drain at least 1.5 m (5 ft) from the house.
- Check valve and backup: the City recommends a check valve on the discharge pipe and backup power for the pump.
Some Calgary homes also have a sealed sanitary sump, which is a separate system from the storm sump. Ask the plumber which one you have.
Permits
The City says installing a sump pump may need a plumbing permit. A homeowner who owns and lives in the home may apply for a homeowner plumbing permit at $116.50. The details are on the City's trade permits page. Ask the plumber who applies for the permit and when the inspection is booked.
How to Choose a Sump Pump Installer
- Get the quote in writing with what it includes: pit, pump, check valve, discharge pipe, concrete cutting and permit.
- Ask exactly where the discharge will go and how it stays clear of the sanitary sewer.
- Ask whether a battery backup is included or priced separately.
- For a new pit, compare two or three quotes, since prices vary with the basement layout and length of the discharge run.
What It Costs
Most Calgary homeowners pay about $1,500 to $3,000 for a new installation, $600 to $1,200 to replace a pump in an existing pit and $400 to $1,000 to add a battery backup. A finished basement runs higher, about $2,000 to $4,000, because the finishes must be protected. See sump pump cost in Calgary for the full table, and plumber in Calgary and home services in Calgary for related work.
Frequently Asked Questions
No. The City says foundation drainage cannot go into the sanitary sewer. It must go to the surface or the City's storm system, and the bylaw allows fines up to $10,000 for each day.
About $1,500 to $3,000 for a new pit, pump and discharge, and about $600 to $1,200 to replace a pump in an existing pit. See sump pump cost in Calgary.
The City of Calgary says to replace a sump pump every 10 years or sooner.
The City says it may need a plumbing permit. A homeowner who lives in the home can apply for a homeowner plumbing permit at $116.50.
The City recommends backup power for sump pumps. A backup typically adds about $400 to $1,000 to an existing pump.
Away from the house, to the surface or the City storm system, at least 2 m from a street or similar, and not onto surfaces that freeze and become slippery.