Water Heater Maintenance in Calgary
Calgary's water is hard everywhere and hardest in the south. A yearly drain and a few checks decide how long a tank lasts.
Calgary tap water measures 141 to 274 mg/L total hardness, depending on the plant. That leaves sediment on the tank floor, and a service visit clears it. The Bearspaw plant feeds much of the north from the Bow River. In 2025 it measured 141 to 200 mg/L. The Glenmore plant feeds much of the south from the Elbow River. It measured 174 to 274 mg/L. Heating water makes the dissolved minerals fall out as sediment. The layer on the tank floor insulates the burner or element and cuts the usable volume. It also makes the tank rumble. A maintenance visit clears it and checks the parts that set the tank's lifespan.
Flush, drain, tune-up, service call: the work is much the same on gas and electric tanks, whether you call it a water heater or a hot water tank.
Directory · 3 companies
Top-rated water heater maintenance companies in Calgary
Independently selected on Google rating, review volume and years in Calgary. Every company here is rated 4.7 or higher. Tap one to open its Google listing, with phone number, hours and recent reviews.
-
View on Google
Alberta Mountain Air Heating & Air Conditioning
Family-owned Calgary company since 2004 and a Lennox dealer. Furnaces, air conditioning, heat pumps and hot water systems.
-
View on Google
Air Force Heating & Air Conditioning
Family-owned and operated in Calgary since 2005. Furnaces, air conditioning and water heaters.
-
View on Google
Calgary Heating Services
Calgary company on 11 Street NE. Furnaces, air conditioning, heat pumps, water heaters, HRVs, plumbing and electrical.
What a Visit Includes
Drain and Flush
The tank empties through its drain valve until the water runs clear, which removes the sediment layer.
Anode Rod
A metal rod that rusts so the tank wall does not. Once it is thin or coated, it is swapped for a new one.
Relief Valve
The safety valve is lifted to confirm it opens and closes cleanly. One that sticks is replaced.
Drain Valve
The tap at the base. Sediment can jam it, and then the tank cannot be emptied until the valve is cleaned or replaced.
How Often to Flush in Calgary
A yearly drain is the starting point for any tank. Southern addresses, where Glenmore water has reached 274 mg/L and is hardest from December to March, are the case for flushing more often, and so is any tank that rumbles when it fires. A tank that has never been drained should go first, because its layer is the thickest. If you cannot remember the last one, treat it as never done.
A softener changes the picture, since the tank then sees far fewer minerals. Age matters too, and hot water tank lifespan in Alberta covers it. The City offers an address lookup if you want to know which plant serves you.
Draining It Yourself
Draining suits a confident homeowner. Leave the anode rod and relief valve to a professional.
- Wait a few hours for the water to cool, then turn the breaker off on an electric tank or the control to off on a gas one.
- Close the cold supply valve to the tank.
- Screw a garden hose onto the drain valve and run it to a floor drain or outside.
- Open a hot tap on an upper floor so air can get in, then open the drain valve.
- Once empty, run some cold water through until the discharge is clear, close the drain and refill. Let a hot tap run until the air is gone before turning the power or gas back on.
Gloves and eye protection. The water may still be hot and the grit is sharp. If the valve clogs and the tank will not empty, stop and call a plumber rather than forcing it. Outside in winter, point the hose where it will not freeze across a walkway.
What It Costs
Ask for the drain as its own line on the quote. One Calgary company's guide puts most water heater repairs at $200 to $600 and an anode rod replacement at around $350. If a diagnostic fee applies, ask whether it is credited against the work, and ask whether a drain is included in the visit or billed on its own line.
Maintenance or Repair?
Maintenance keeps a working tank working. For cold water or a wet floor, start with water heater not working in Calgary or a leaking water heater, then water heater repair in Calgary.
If a visit turns up a corroded tank or a string of worn parts, move on to signs a water heater needs replacing and water heater replacement in Calgary.
Find a Trusted Calgary Water Heater Company
Calgary's top-rated home service companies - independently selected, all with 4.7+ Google ratings. No forms, no signup required.
Connect NowFrequently Asked Questions
At least once a year. In the south, where hardness has run as high as 274 mg/L, more often is sensible if there is no softener.
Yes, once the fuel is off, the water has cooled and you are wearing gloves. Leave the anode rod and relief valve to a plumber.
It reduces buildup, but a yearly look is still worth it, because the anode and valves wear regardless.
Yes, a yearly flush to remove scale. See tankless water heaters in Calgary.