Leaking Water Heater in Calgary: Repair or Replace?
A weeping valve or fitting is a repair, a seeping tank wall is not. Cut the water and the fuel first, then trace where it starts.
Spend the first few minutes shutting things off, then work out the source before you call anyone.
Shut Things Off in This Order
- Close the cold supply on the pipe at the top of the tank by turning the handle clockwise. If it is seized, shut the main valve where water enters the house.
- Cut the fuel. Switch off the breaker for an electric tank. On a gas tank, turn the control to off or pilot.
- Do not wade in. The water can be scalding, and an electric tank has wiring low on the jacket.
- Move boxes and stored items off the floor and start mopping, especially if the floor drain is across the room.
Smell gas? Leave at once and do not touch light switches or appliances. From outside, call ATCO Gas at 1-800-511-3447 or 911.
Where Is It Coming From?
Dry the tank and the floor, then watch for the first bead of water. Where the leak starts is more useful than where the puddle ends up.
| Where it starts | Probable cause | Result |
|---|---|---|
| Pipe connections on top | Loose or worn fitting | Repair; one Calgary company says most water heater repairs land at $200 to $600 |
| Discharge pipe from the relief valve | Worn valve, or pressure or heat too high | Repair |
| Small tap low on the tank | Drain valve | Repair |
| Jacket or floor, every fitting dry | Rusted steel shell | New tank, $1,500 to $3,500 installed |
Calgary Water and Tank Corrosion
Which tap water you have shapes how a tank ages. The south side gets Glenmore water at 174 to 274 mg/L hardness in 2025, and the north gets Bearspaw water at 141 to 200 mg/L, both hard. Heating drops minerals onto the floor of the tank, where they trap moisture against the steel. The anode rod is made to rust first so the shell does not, and a rod that is used up leaves the tank wall to take the damage. A leaking shell cannot be patched, whatever the age.
If only a fitting is weeping but the tank is already old, ask for a replacement quote beside the repair one. How long a hot water tank lasts in Alberta and signs your water heater needs replacing explain age, and repair or replace in Calgary puts the choices next to each other.
A Dripping Relief Valve
The temperature and pressure relief valve sits on the top or side with a pipe pointed at the floor. Steady dripping usually means the valve is tired. If a new valve drips too, suspect high house water pressure, which often calls for a pressure-reducing valve or an expansion tank. If hot water is gushing from the pipe, turn off the fuel, shut the water and phone for help right away.
What You Can Do and What the City Requires
Closing valves, switching off power and drying the area are for everyone. Swapping a gas tank is not. Gas appliances up to 400,000 BTU/h are Class B gasfitter work in Alberta, and a homeowner in Calgary cannot pull a gas permit unless they are a journeyman gasfitter. The contractor applies. The City says replacing a tank may call for a plumbing permit, and the trade permit fee is $112 plus $9.79 per $1,000 of job value plus 4%, with a minimum of $116.50.
Costs and Who to Phone
Calgary, 2026: most water heater repairs $200 to $600, an anode rod swap around $350, a new tank $1,500 to $3,500 installed with the old tank hauled away and the City gas permit included.
When you phone, say where the water is, how old the tank is and what you have already switched off. Water heater repair in Calgary lists local firms. If the tank is finished, see repair costs, replacement costs or replacement in Calgary.
Directory · 3 companies
Top-rated water heater companies in Calgary
Independently selected on Google rating, review volume and years in Calgary. Every company here is rated 4.7 or higher. Tap one to open its Google listing, with phone number, hours and recent reviews.
-
View on Google
Alberta Mountain Air Heating & Air Conditioning
Family-owned Calgary company since 2004 and a Lennox dealer. Furnaces, air conditioning, heat pumps and hot water systems.
-
View on Google
Air Force Heating & Air Conditioning
Family-owned and operated in Calgary since 2005. Furnaces, air conditioning and water heaters.
-
View on Google
Calgary Heating Services
Calgary company on 11 Street NE. Furnaces, air conditioning, heat pumps, water heaters, HRVs, plumbing and electrical.
Frequently Asked Questions
It can be. The water may be scalding and an electric tank has wiring near the floor. Close the supply and the fuel before anything else.
If the drain valve is the source, yes. If every fitting is dry and water seeps from the tank body, it needs replacing.
Usually not. A loose connection or the relief valve is the common cause, and both are repairs.
The valve may be worn, or pressure or temperature may run too high. Persistent pressure problems can need a pressure-reducing valve or an expansion tank.
Yes. Keep the water and the fuel off until you know where the leak is.
$1,500 to $3,500 installed, depending on size.
No. Gas work is for a Class B gasfitter and the City issues the gas permit to a qualified gasfitter, so hire a licensed firm.