Troubleshooting

Hot Water Tank Leaking? What to Do Right Now

Shut off the water to the tank first, then work out where the water is coming from: a fitting is a repair, the tank itself means replacement.

SD Editorial
ServiceDispatch Editorial Team ServiceDispatch.ca
Written for Winnipeg, MB

Water under a hot water tank can be a few drops from a fitting or the start of a flood. Do the steps below in order. They take a couple of minutes and limit the damage whichever it turns out to be. If the water will not stop, see emergency plumber in Winnipeg.

Do These Steps First

  1. Shut off the cold water supply to the tank. The valve is on the pipe going into the top of the tank; turn it clockwise until it stops. If it will not close, shut off the main water valve for the house.
  2. Turn off the power or gas. On an electric tank, switch off its breaker. On a gas tank, turn the gas control to its off or pilot setting. Do this before the burner or elements can run in a partly empty tank.
  3. Keep people and pets away from the water. Water from a hot water tank can be hot enough to scald, and on an electric tank it may be near live wiring.
  4. Move anything stored on the floor and mop up what you can, especially if the tank is in a finished basement.
  5. Find where the water is coming from using the sections below.

If you smell gas near a gas tank, leave the house with everyone and leave the doors open. From a safe place, call 911 or Manitoba Hydro at 1-888-624-9376.

Why Is My Hot Water Tank Leaking From the Bottom?

There are three common causes, and they have different outcomes.

Hot Water Tank Leaking From the Top

Water at the top almost always comes from the pipe connections where the cold supply and hot outlet join the tank, or from the relief valve. Fittings can often be tightened or replaced, which is a repair. Water running down the outside of the tank from the top can look like a failed tank when it is a fitting; dry the area and watch where the first drop appears.

Relief Valve Leaking or Dripping

The temperature and pressure (T&P) relief valve is the safety valve on the side or top of the tank, with a discharge pipe running down from it. A drip from that pipe means the valve is opening or has worn. Replacing a T&P valve costs $150–$350. A valve that opens because the household water pressure is high can keep dripping after replacement; A. O. Smith says excess water pressure stresses the plumbing and that a pressure-reducing valve or thermal expansion tank can help. A valve that is gushing hot water, rather than dripping, is an emergency: shut off power or gas and the water and call right away.

Repair the Fitting or Replace the Tank?

Where the water comes fromUsuallyTypical Winnipeg cost
Drain valveRepair$150–$350
T&P relief valveRepair$150–$350
Pipe fittings at the topRepairService call $100–$195 plus parts
Tank body (shell)Replace the tankGas $1,600–$2,400; electric $1,000–$1,600

A tank leaking from its body is finished however old it is. If the leak is from a fitting and the tank is past 10 years, ask for a replacement quote alongside the repair: water heater repair vs replace in Winnipeg goes through the decision. Signs your hot water tank needs replacing and how long a hot water tank lasts in Manitoba help you judge age.

What a Leak Call Costs

Winnipeg, 2026: a service call is $100–$195 and normally covers the first hour of labour. A leak at night or on a weekend adds $75–$300 after-hours. See water heater repair costs and hot water tank replacement cost.

When you call, say where the water is coming from, the tank's age if you know it, and whether you have shut off the water and power or gas. Ask for the price before work starts. For who to call, see water heater repair in Winnipeg; if the tank needs replacing, water heater replacement in Winnipeg.

Directory · 4 companies

Top-rated water heater companies in Winnipeg

Independently selected on Google rating, review volume and years in Winnipeg. Every company here is rated 4.7 or higher. Tap one to open its Google listing, with phone number, hours and recent reviews.

  1. Tradesman Mechanical Services

    4.9 · 570+ Google reviews

    Winnipeg mechanical contractor for furnaces, air conditioning, heat pumps, water heaters, refrigeration and electrical.

    View on Google
  2. Fair Service Heating & Air Conditioning

    4.9 · 210+ Google reviews

    20+ years in Winnipeg and BBB A+ rated. Furnaces, air conditioning and water heaters.

    View on Google
  3. Provincial Heating & Cooling

    4.8 · 400+ Google reviews

    Winnipeg heating and cooling company and Carrier dealer. Furnaces, air conditioning, heat pumps and water heaters.

    View on Google
  4. Shorty's Plumbing & Heating

    4.8 · 610+ Google reviews

    Family-owned since 1983. Heating, cooling, boilers, hot water tanks and plumbing, so one call covers both.

    View on Google

If the leak is coming from a pipe or fixture and not the tank, see plumbers in Winnipeg.

Frequently Asked Questions

The drain valve, a nearby fitting or the tank itself. A dripping drain valve is a $150–$350 repair; seepage from the tank body means replacement.

Usually a loose or worn pipe connection or the relief valve. Both are repairs.

The valve has worn, or it is opening because water pressure or temperature is too high. Replacing it costs $150–$350; if pressure is the cause, a pressure-reducing valve or expansion tank may be needed.

Treat it as one until you know the source. Shut off the water to the tank and the power or gas, then find where the water is coming from.

You can shut off the water and power or gas and dry the area, which are the first steps. Manitoba Hydro says natural gas equipment must be installed by a licensed gas fitter, so a replacement gas tank is a job for a gas fitter.

$150–$350 for a valve. If the tank has failed, a new gas tank installed costs $1,600–$2,400 and an electric one $1,000–$1,600.

Yes. Shut off the cold water supply to it, and switch off the breaker on an electric tank or the gas control on a gas tank.

See Top-Rated Companies