Water Heater and Hot Water Tank Repair in Winnipeg
When the hot water stops or the tank starts dripping, you want the problem named quickly and priced fairly. Here is what usually fails, what it costs, and who to call.
A water heater or hot water tank repair in Winnipeg typically starts with a $100 to $195 service call that usually covers the first hour of labour, and most repairs land between about $150 and $950 once the part is added. No hot water, lukewarm water, or a drip from the tank: most water heater problems in Winnipeg come down to one failed part, and most of those parts can be replaced without replacing the tank. Whether you call it a water heater or a hot water tank, the same short list of components is behind nearly every service call.
Gas and electric tanks fail in different ways, so the first job for the technician is to find which part has gone. The companies below repair both.
Directory · 4 companies
Top-rated water heater repair companies in Winnipeg
Independently selected on Google rating, review volume and years in Winnipeg. Every company here is rated 4.7 or higher. Tap one to open its Google listing, with phone number, hours and recent reviews.
-
View on Google
Tradesman Mechanical Services
Winnipeg mechanical contractor for furnaces, air conditioning, heat pumps, water heaters, refrigeration and electrical.
-
View on Google
Fair Service Heating & Air Conditioning
20+ years in Winnipeg and BBB A+ rated. Furnaces, air conditioning and water heaters.
-
View on Google
Provincial Heating & Cooling
Winnipeg heating and cooling company and Carrier dealer. Furnaces, air conditioning, heat pumps and water heaters.
-
View on Google
Shorty's Plumbing & Heating
Family-owned since 1983. Heating, cooling, boilers, hot water tanks and plumbing, so one call covers both.
What Water Heater Repair Covers
Knowing the likely culprit helps you describe the problem when you call.
Heating Element or Thermostat
Electric tanks only. A failed element or thermostat gives you lukewarm water or none at all. Typically $175 to $450.
Thermocouple, Flame Sensor or Igniter
Gas tanks only. The burner won't stay lit or won't light at all. Typically $175 to $450.
Gas Control Valve
Controls gas to the burner and the temperature of the tank. The most expensive common gas repair, typically $350 to $800.
T&P Relief Valve
The safety valve on the tank. A valve that drips or won't operate gets replaced, typically $150 to $350.
Anode Rod
The rod inside the tank that wears so the steel doesn't. Replacing a worn rod is typically $175 to $450.
Power-Vent Blower or Pressure Switch
Power-vent gas tanks only. A failed blower or switch shuts the heater down. Blower typically $450 to $950; pressure switch $200 to $425.
Hot Water Tank Problems and the Part Behind Them
Match what you see to the part a technician is most likely to check. Prices are the typical Winnipeg totals listed on this page.
- No hot water, electric tank: heating element or thermostat, typically $175 to $450.
- No hot water, gas tank: thermocouple, flame sensor or igniter, typically $175 to $450, or the gas control valve, typically $350 to $800.
- Not enough hot water or lukewarm water: on an electric tank, the heating element or thermostat; on a gas tank, the gas control valve or the thermocouple or igniter.
- Pilot will not stay lit or the igniter will not light: thermocouple, flame sensor or igniter, typically $175 to $450. On a power-vent tank that shuts down, the blower or pressure switch.
- Rusty or brown hot water: a worn anode rod, typically $175 to $450, is the first thing to ask about.
- Leak or drip at the top: the T&P relief valve, typically $150 to $350.
- Leak at the bottom of the tank: note where the water is coming from and see what to do when a hot water tank is leaking. A leak from the tank itself is not a part repair.
Gas smell: If you smell gas, leave right away, leave the door open behind you, and from a safe place call 911 or Manitoba Hydro at 1-888-624-9376.
If water is pooling under the tank, see what to do when a hot water tank is leaking. If nothing has failed yet and you want the tank looked after, that is water heater maintenance, not a repair.
What to Check Before Calling
Breaker (electric tanks): Check the breaker. If it has tripped, reset it once. If it trips again, stop and call.
Temperature setting: Confirm the dial or thermostat hasn't been turned down.
Where the water is: Note whether any water is on the floor and where it seems to come from: the top, a valve, the pipes, or the bottom of the tank.
The rating label: It shows the model and serial number. Have them ready when you call; they help the technician arrive with the right parts.
For a full walkthrough, see what to do when your hot water tank stops working.
Water Heater and Hot Water Tank Repair Costs in Winnipeg
Most repairs fall between about $150 and $950 depending on the part, and most land at the lower end. A service call typically runs $100 to $195 and usually covers the first hour of labour. After-hours calls can add roughly $75 to $300.
Typical Winnipeg totals for parts and labour: T&P or drain valve $150 to $350, thermocouple or igniter $175 to $450, anode rod $175 to $450, element $200 to $450, gas control valve $350 to $800, power-vent blower $450 to $950.
For the full breakdown by repair, see the water heater repair cost guide for Winnipeg.
Repair vs. Replace
Tank water heaters, gas or electric, typically last about 8 to 12 years. On a gas tank in that age range, a repair quote above roughly $500 usually points toward replacement. A newer tank with a failed part is usually worth repairing.
See water heater repair vs. replacement in Winnipeg and signs your hot water tank needs replacing if you're weighing it up. For the price of a new tank, see water heater replacement cost in Winnipeg.
Find a Trusted Winnipeg Water Heater Company
Winnipeg's top-rated home service companies - independently selected, all with 4.7+ Google ratings. No forms, no signup required.
Connect NowFrequently Asked Questions
Usually, yes. Elements, thermostats, thermocouples, igniters, valves and anode rods are all replaceable parts. Where a leak is coming from tells the technician whether a repair is possible, so note that before you call.
Typically $100 to $195, and it usually includes the first hour of labour. Ask whether the fee is credited toward the repair if you go ahead. After-hours calls can add roughly $75 to $300.
Most repairs take half an hour to two hours of labour: valves and sensors at the short end, a gas control valve or power-vent blower at the long end. If a part has to be ordered, expect a delay.
When a tank in its 8-to-12-year range needs a repair above about $500, or when an electric tank of that age needs more than a small repair. Ask for the repair price and the replacement price together so you can compare.
On an electric tank the usual causes are a failed heating element or thermostat, typically $175 to $450. On a gas tank it is usually the thermocouple, flame sensor or igniter, typically $175 to $450, or the gas control valve, typically $350 to $800. Check the breaker on an electric tank and the temperature setting before you call.
Usually not. Most repairs in Winnipeg fall between about $150 and $950 depending on the part, and most land at the lower end, with a service call at $100 to $195. A gas control valve ($350 to $800) or a power-vent blower ($450 to $950) is where the bill climbs. On a tank in its 8-to-12-year range, compare a quote above about $500 with the price of a new tank.