Water Heater Maintenance - Winnipeg

Hot Water Tank Flush & Maintenance in Winnipeg

A hot water tank needs a little attention every year to reach the end of its life. Here is what a flush and service covers, how often to book it, and who to call.

SD Editorial
ServiceDispatch Editorial Team ServiceDispatch.ca
Written for Winnipeg, MB
4.7+ Google ratings
Ask about after-hours service
Winnipeg-based companies

A hot water tank sits in the basement for years without a thought, until it stops working or starts to leak. A yearly service is mostly three jobs: flushing out the sediment, checking the anode rod, and testing the safety valve. Together they help the tank last as long as it should and catch a worn part before it becomes a failure.

Whether you call it a water heater service or a hot water tank flush, it is the same visit. The companies below service gas and electric tanks.

Directory · 4 companies

Top-rated water heater maintenance companies in Winnipeg

Independently selected on Google rating, review volume and years in Winnipeg. Every company here is rated 4.7 or higher. Tap one to open its Google listing, with phone number, hours and recent reviews.

  1. Tradesman Mechanical Services

    4.9 · 570+ Google reviews

    Winnipeg mechanical contractor for furnaces, air conditioning, heat pumps, water heaters, refrigeration and electrical.

    View on Google
  2. Fair Service Heating & Air Conditioning

    4.9 · 210+ Google reviews

    20+ years in Winnipeg and BBB A+ rated. Furnaces, air conditioning and water heaters.

    View on Google
  3. Provincial Heating & Cooling

    4.8 · 400+ Google reviews

    Winnipeg heating and cooling company and Carrier dealer. Furnaces, air conditioning, heat pumps and water heaters.

    View on Google
  4. Shorty's Plumbing & Heating

    4.8 · 610+ Google reviews

    Family-owned since 1983. Heating, cooling, boilers, hot water tanks and plumbing, so one call covers both.

    View on Google

What a Water Heater Service Covers

Tank Flush

Draining water from the bottom of the tank to carry out the sediment that settles there. Manufacturers recommend doing it about once a year.

Anode Rod Check

The rod inside the tank wears away so the steel doesn't. A rod that is worn or mostly coated in calcium needs replacing, typically $175 to $450.

T&P Relief Valve Test

The safety valve that lets water out if the tank overheats or pressure builds. It gets tested, and replaced if it does not release properly, typically $150 to $350.

Drain Valve

The valve used to flush the tank. A drain valve that leaks or won't open gets replaced, typically $150 to $350.

How Often Should You Flush a Hot Water Tank?

Once a year is the standard. If you have hard water, manufacturers advise flushing about every six months.

If you have never had the tank flushed and it is more than a few years old, book a service now rather than waiting for the next anniversary. The tank's age matters too: see how long a hot water tank lasts in Manitoba.

Can I Flush My Own Hot Water Tank?

Flushing the tank is a safe job for a homeowner. The anode rod and T&P valve usually need tools and safety precautions, so manufacturers recommend a qualified plumber for those.

If you flush it yourself, turn off the power (electric) or set the gas control to pilot or off (gas), connect a hose to the drain valve, and let the tank empty into a floor drain or outside. Hot water can scald, so let the tank cool first.

Testing the T&P valve: The test is to lift the lever briefly and confirm that water flows freely through the discharge pipe. If nothing comes out, or the valve keeps dripping afterwards, it needs replacing. Keep clear of the discharge pipe: the water can be scalding.

What Water Heater Maintenance Costs in Winnipeg

The price of a flush or service visit varies by company, and plenty of them include it in a maintenance visit, so ask what the quote covers before you book. Parts found worn during a service are priced on top. Typical Winnipeg totals for parts and labour:

Anode rod $175 to $450, T&P valve $150 to $350, drain valve $150 to $350.

These are the same prices as a repair. For the full list, see the water heater repair cost guide for Winnipeg.

What If the Tank Is Already Leaking or Not Heating?

Maintenance keeps a working tank working. If the water has gone cold or there is water on the floor, that is a repair, not a service: see what to do when your hot water tank stops working or what to do when a hot water tank is leaking. For parts and prices, go to water heater repair in Winnipeg.

If the tank is old and the service turns up a bad leak or several worn parts, see signs your hot water tank needs replacing and water heater replacement in Winnipeg.

Ready to connect?

Find a Trusted Winnipeg Water Heater Company

Winnipeg's top-rated home service companies - independently selected, all with 4.7+ Google ratings. No forms, no signup required.

Connect Now

Frequently Asked Questions

About once a year, or about every six months if you have hard water. Flushing removes the sediment that collects at the bottom of the tank.

Check it once a year. If it is worn away or mostly coated in calcium, it is time to replace it. Replacement is typically $175 to $450 in Winnipeg.

Lift the lever briefly and check that water flows freely through the discharge pipe. If it does not, or the valve leaks afterwards, replace it. A replacement is typically $150 to $350.

Yes. Natural Resources Canada recommends having a water heater serviced by a qualified professional about once every one to two years. Ask the company what the service of a tankless unit covers. See tankless water heaters in Winnipeg.

See Top-Rated Companies