Boiler Repair - Saskatoon

Boiler Repair in Saskatoon

When the radiators go cold or the boiler starts losing pressure, you want the fault named quickly and priced fairly. Here is what usually fails, what it costs, and who to call.

SD Editorial
ServiceDispatch Editorial Team ServiceDispatch.ca
Written for Saskatoon, SK
4.7+ Google ratings
Ask about after-hours service
Saskatoon-based companies

Cold radiators, a boiler that locks out, a pressure gauge that keeps dropping, or a drip at the pump: most hot water boiler problems in Saskatoon come down to one failed part, and most of those parts can be replaced without replacing the boiler. Boilers are most often found in older houses and in older apartment and condo buildings, so a technician who works on them regularly is worth asking for. For what a fix costs, see boiler repair cost in Saskatoon.

Not every heating company repairs hot water boilers, so confirm that before you book. The companies below are Saskatoon heating companies; ask each whether they service boilers. For the companies that do the work, see boiler installation and repair in Saskatoon.

Directory · 3 companies

Top-rated boiler repair companies in Saskatoon

Independently selected on Google rating, review volume and years in Saskatoon. Every company here is rated 4.7 or higher. Tap one to open its Google listing, with phone number, hours and recent reviews.

  1. Centennial Plumbing, Heating & Electrical

    4.9 · 3,190+ Google reviews

    Saskatoon family business since 1967. Heating, cooling, boilers, water heaters, plumbing and electrical.

    View on Google
  2. Razor Heating & A/C

    5.0 · 750+ Google reviews

    Owner-led Saskatoon company since 2007. Furnaces, air conditioning, heat pumps, boilers and water heaters.

    View on Google
  3. Pro Service Plumbing, Heating, AC & Electrical

    4.8 · 450+ Google reviews

    Saskatoon company on Brodsky Avenue. Boiler repair and service, heat pumps, furnaces and air conditioning.

    View on Google

What Boiler Repair Covers

Knowing the likely culprit helps you describe the problem when you call.

Circulator Pump

The pump that moves hot water to the radiators. A failed pump means a hot boiler and cold rooms. Typically $280 to $1,000, depending on the pump.

Expansion Tank

Absorbs the water's expansion as it heats. A failed tank causes pressure swings and a relief valve that drips. Typically $250 to $650.

Pressure Relief Valve

The safety valve on the boiler. A valve that drips or will not seat gets replaced. Typically $180 to $400.

Igniter or Flame Sensor

The boiler tries to fire, then shuts down. Often a dirty or worn part. Typically $200 to $575.

Zone Valve or Actuator

When one zone stays cold while the others heat, the valve or its actuator head is the first suspect. Typically $200 to $600.

Aquastat or High-Limit

The control that tells the boiler when to fire and stop. A failed control gives short cycling or no heat. Typically $200 to $525.

Leak at a Fitting, Valve or Pipe

Small leaks are repairable. Typically $180 to $650, depending on where the leak is and how easy it is to reach.

Bleeding Radiators

Trapped air leaves radiators cold at the top. You can do it with a radiator key; a technician visit is typically $150 to $250.

Gas smell: SaskEnergy says that if you think there is a gas leak, leave the home or area immediately, avoid light switches, electrical devices, phones and vehicles, and keep away from open flames. Then call SaskEnergy's emergency line at 1-888-700-0427.

If the boiler has stopped heating and you are not sure why, what to do when your boiler is not working walks through the usual causes. If nothing has failed yet and you want it looked after, that is boiler service and maintenance, not a repair.

What to Check Before Calling

The pressure gauge: Note the reading. Low pressure, or pressure that climbs very high, tells the technician where to start. The normal range is in the boiler's manual.

Power and thermostat: Check that the boiler switch is on, the breaker has not tripped and the thermostat is calling for heat.

Where the heat stops: Note whether every radiator is cold or only some, and whether the radiators are cold only at the top.

Water on the floor: Note where it seems to come from: a valve, a pipe joint, the pump or the boiler itself.

The rating plate: It shows the model and serial number. Have them ready when you call; they help the technician arrive with the right parts.

Boiler Repair Costs in Saskatoon

Most boiler repairs in Saskatoon fall between about $180 and $650 depending on the part, and a circulator pump can push the bill toward $1,000. Labour runs about $110 to $165 an hour. After-hours calls typically add 20 to 50 percent, or about $200.

Typical Saskatoon totals for parts and labour: relief valve $180 to $400, igniter or flame sensor $200 to $575, aquastat $200 to $525, zone valve $200 to $600, expansion tank $250 to $650, circulator pump $280 to $1,000.

For the repair prices alongside the cost of a new boiler, see the boiler replacement cost guide for Saskatoon.

Repair vs. Replace

A failed pump, valve, sensor or control is almost always worth repairing. A leak from the heat exchanger or a boiler section is different: that usually means replacement, as does a run of repairs on an old unit. Any gas boiler installed new today has to be at least 90% efficient, which in practice means a condensing boiler with new plastic venting, so a replacement is a bigger job than a swap.

See boiler replacement in Saskatoon for what a new boiler involves, and boiler and radiator homes in Saskatoon for the repair-or-replace question across the life of the system.

Ready to connect?

Find a Trusted Saskatoon Heating Company

Saskatoon's top-rated home service companies - independently selected, all with 4.7+ Google ratings. No forms, no signup required.

Connect Now

Frequently Asked Questions

Most repairs run about $180 to $650, depending on the part. A circulator pump is the most expensive common repair, up to about $1,000. After-hours calls typically add 20 to 50 percent, or about $200.

Usually trapped air, a failed circulator pump or a stuck zone valve. Bleeding the radiators fixes the air; a pump or valve needs a technician.

Usually it can be repaired. Pumps, valves, sensors, controls and expansion tanks are all replaceable parts. A leaking heat exchanger or boiler section is the common case where replacement makes more sense.

For work on the gas side of the boiler, yes. The Technical Safety Authority of Saskatchewan (TSASK) says only licensed gas contractors are permitted to do gas installations, and it has a Find a Licensed Contractor tool on its website.

See Top-Rated Companies