HRV Maintenance and Service in Saskatoon
Filters need attention every one to three months, the core every six, and a technician should balance the airflow once a year. Here is the routine and the price.
Most HRV maintenance is quick and free, such as cleaning the filters, clearing the outdoor hood and dusting the core, and a single professional visit each year handles the remainder. Let the filters clog, the outdoor hood ice over or the core collect dust, and ventilation and heat recovery both slip. The result can be a damp or stuffy home. Natural Resources Canada says regular upkeep extends the life of the unit. Most chores are quick and free, and a single professional visit each year handles the remainder.
Whether you call it HRV service, cleaning or maintenance, the work is the same. Not every HVAC company touches HRVs, so check before booking. The companies below list ventilation, air quality or HRV work.
What Does an HRV Service Include?
Filters and Hoods
Fresh or washed filters, and the intake and exhaust hoods and their screens cleared of anything blocking them.
Core and Fans
A close look at the heat-exchange core, cleaned where needed, plus a gentle brush or vacuum over the fan blades.
Drain and Defrost
Confirmation that the condensate pan and drain run freely, and a test that the defrost system kicks in.
Controls and Electrical
Inspection of the controls and wiring connections, in particular any that sit within the airstreams.
Balancing
Supply and exhaust flows measured, adjusted when they do not match, and the readings noted on the unit's label.
How Often Should an HRV Be Cleaned?
Your model's manual comes first. The City of Saskatoon's HRV guide advises looking at the filters roughly every three months and checking the air intakes for obstructions. For a part-by-part timetable, use the one from Natural Resources Canada:
| Part | How Often |
|---|---|
| Filters | Every 1 to 3 months |
| Outdoor hoods and screens | Every 1 to 3 months, and more often in leaf season and winter |
| Core | Every 6 months |
| Drain and pan | Every 6 months |
| Fans | Every 3 to 6 months |
| Grilles and ducts | Once a year |
| Contractor service, defrost test and balancing | Once a year |
How Do I Clean an HRV?
Switch the unit off and pull the plug before you start.
- Filters. Take them out and vacuum off the loose dust. Washable types then get a rinse in mild soapy water and time to dry. Others cannot be cleaned and have to be replaced. Natural Resources Canada says most washable filters last for several years.
- Outdoor hoods. Remove leaves, snow, frost and trash from both hoods and their screens. If a screen needs replacing, keep the mesh no finer than 1/4 inch, because finer mesh restricts airflow.
- Core. Slide it out and vacuum the dust off. Wash it only if the manual permits. A Broan and vanEE manual lets owners soak an HRV core in cool or lukewarm mild soapy water, but says an ERV core must never be washed. Reinstall it right side up.
- Drain and pan. Tip two or three litres of warm water into the pan and watch it flow away. A slow drain can be freed with a length of thin wire. The tubing must form a trap, an S or a loop that holds water.
- Fans. Lightly brush or vacuum the blades. Oil the motor only when the manual tells you to.
- Grilles. Wipe away dust and grease, and clean the grease filter on the kitchen exhaust.
When the next cold spell arrives, look at the core again to be sure it is defrosting.
How Much Does HRV Service Cost in Saskatoon?
An HRV service is about $60 to $150 as an add-on to a furnace or duct cleaning, and about $100 to $200 as its own visit. A full core clean can reach about $300. Filters are about $20 to $60 for most units, and large kits for some bigger units run $125 or more. Duct cleaning is billed separately, and Natural Resources Canada notes that a professional duct cleaning is normally needed only every second year.
HRV service $60 to $150 as an add-on, $100 to $200 on its own · filters $20 to $60 for most units. Natural Resources Canada suggests booking the furnace and HRV together, which costs less than two separate visits, and asking whether the written condition report carries a fee.
What Can I Do Between Services?
- Peek at the filters and hoods monthly or every other month through winter, and after each snowstorm or frost.
- Keep fumes away from the intake. Garbage, pesticides and barbecue smoke should stay clear of it. If you have to make fumes nearby, turn the HRV off until you are done.
- Match the humidity setting to the season. The winter settings are in the Saskatoon HRV guide.
- Try the trash bag test. Natural Resources Canada describes timing a bag as it inflates at the exhaust hood and deflates at the intake. If the two times land within a few seconds of each other, the flows are close to balanced.
What If the HRV Is Already Not Working?
Upkeep only helps a unit that still runs. For a stopped HRV, weak airflow, a frozen core or windows streaming with water, go to HRV not working in Saskatoon. When the unit is beyond repair, HRV installation and replacement cost in Saskatoon has the price of a new one. The visit for a furnace tune-up is also a convenient time to add the HRV: see furnace inspection in Saskatoon.
Directory · 2 companies
Saskatoon companies that list HRV work
These top-rated Saskatoon companies state HRV work on their own websites. Other listed companies may also do this work, so ask them. Tap one to open its Google listing, with phone number, hours and recent reviews.
-
View on Google
Centennial Plumbing, Heating & Electrical
Saskatoon family business since 1967. Heating, cooling, boilers, water heaters, plumbing and electrical.
-
View on Google
Razor Heating & A/C
Owner-led Saskatoon company since 2007. Furnaces, air conditioning, heat pumps, boilers and water heaters.
Frequently Asked Questions
Filters and outdoor hoods every one to three months, with the core and drain every six months. That timetable is from Natural Resources Canada, while the City of Saskatoon suggests checking filters about every three months. Always defer to the manual for your model.
Expect about $60 to $150 as an add-on to a furnace or duct cleaning, or about $100 to $200 as its own visit. A full core clean can reach about $300. A visit should include cleaning, a defrost test and a measured airflow balance.
Power the unit down, pull the core out and vacuum it. Wash it only when the manual says that is acceptable: an HRV core can take a soak in lukewarm, mild soapy water, but an ERV core cannot be washed. Let it dry completely and refit it right side up.
Filters, hoods, core, drain and fan blades are all yours to handle. Measuring and adjusting the airflow, testing the defrost and checking the electrical parts belong to a technician.