Boiler Service and Maintenance in Edmonton
A yearly service is the cheapest way to keep a boiler running through an Edmonton winter. Here is what a visit covers and what you can check yourself.
A boiler that is looked after once a year is far less likely to fail on the coldest night. Edmonton sees about 389 hours a year below -20 °C, and a boiler works hardest exactly then. One boiler maker notes that heat exchangers need cleaning annually to limit corrosion, and a condensing boiler also depends on a clear condensate drain. For the companies that do the work, see boiler installation and repair in Edmonton.
Not every heating company services hot water boilers, so ask before you book. Gas work belongs to Alberta's Class B gasfitter trade, and the companies below are Edmonton heating companies you can ask about boilers.
Directory · 1 company
Top-rated boiler service companies in Edmonton
Independently selected on Google rating, review volume and years in Edmonton. Every company here is rated 4.7 or higher. Tap one to open its Google listing, with phone number, hours and recent reviews.
-
View on Google
Weiss-Johnson Heating, AC & Plumbing
Edmonton family business since 1977. Furnaces, air conditioning, heat pumps, boilers, water heaters, plumbing and HRVs.
What a Boiler Service Covers
- Burner and heat exchanger: cleaning, and a check that combustion is clean.
- Ignition and safety controls: igniter or flame sensor, high-limit, low-water cutoff and relief valve.
- Venting and condensate: the vent pipe and termination, and on a condensing boiler the trap and drain.
- Pressure and expansion tank: that pressure sits in the manual's range and the tank is doing its job.
- Pump and zone valves: that the pump runs and each zone opens and closes.
- Leaks and corrosion: around fittings, valves and the boiler body.
Ask what scale or sludge the technician finds. Edmonton's treated water averages about 176 mg/L of hardness, so a system that has been topped up often is more likely to carry deposits. A visit is also the time to ask about the boiler's age and what to plan for.
What You Can Do Yourself
- Bleed radiators that are cold at the top, then check that the pressure is back in range.
- Read the pressure gauge now and then. A reading that keeps falling or rising is a service call.
- Keep radiators clear of furniture and heavy covers.
- Check the floor around the boiler for drips, and keep the outdoor vent termination clear of snow and ice.
- Test your carbon monoxide alarms on a regular schedule.
Anything inside the boiler, or involving gas, is for a licensed gas contractor.
When to Book
Before the heating season: late summer or early fall, ahead of the first hard frost, when companies have the most room. Book a service as well when you move into a house with a boiler, when it starts making new noises or when it has gone more than a year without one.
If the boiler has already stopped, see boiler not working in Edmonton or boiler repair in Edmonton. For what repairs and replacement cost, see the boiler repair cost guide.
Find a Trusted Edmonton Heating Company
Edmonton's top-rated home service companies - independently selected, all with 4.7+ Google ratings. No forms, no signup required.
Connect NowFrequently Asked Questions
Once a year, before the heating season.
Cleaning and checking the burner and heat exchanger, the ignition and safety controls, venting and condensate drain, pressure and expansion tank, and the pump and zone valves.
It is the cheapest way to catch a failing part before you lose heat in winter. A common repair such as a circulator pump or low-water cutoff costs several hundred dollars, so catching one early saves money.
You can bleed radiators, read the gauge and keep the area clear. Cleaning the burner and heat exchanger and checking the gas side are for a licensed gas contractor.