Furnace Inspection - Edmonton

Furnace Inspection & Cleaning in Edmonton

A fall inspection is the most dependable way to avoid a no-heat night. Here is what a technician checks, what it costs and when to book.

SD Editorial
ServiceDispatch Editorial Team ServiceDispatch.ca
Written for Edmonton, AB
4.7+ Google ratings
Ask about after-hours service
Edmonton-based companies

A furnace tune-up in Edmonton typically costs $100 to $200, before GST, and it is cheap protection against a part giving up on the coldest night. A marginal part that survived the summer tends to give up on the coldest night, not a mild one.

An annual inspection and cleaning is cheap protection against that. ATCO Gas advises having your furnace and natural gas appliances checked regularly by a qualified technician, and the cost is small next to an after-hours repair.

Directory · 5 companies

Top-rated furnace inspection companies in Edmonton

Independently selected on Google rating, review volume and years in Edmonton. Every company here is rated 4.7 or higher. Tap one to open its Google listing, with phone number, hours and recent reviews.

  1. Friesen's Climate Control

    4.9 · 1,120+ Google reviews

    Family owned and operated in Edmonton since 2007. Furnaces, air conditioning, heat pumps, water heaters and HRVs.

    View on Google
  2. Otto Heating & Cooling

    4.9 · 720+ Google reviews

    Serving Edmonton since 2007. Furnaces, air conditioning, heat pumps and water heaters.

    View on Google
  3. Trust Home Comfort

    5.0 · 820+ Google reviews

    Edmonton heating and cooling company on 27 Avenue NW. Furnaces, air conditioning, heat pumps and water heaters.

    View on Google
  4. Weiss-Johnson Heating, AC & Plumbing

    4.8 · 1,940+ Google reviews

    Edmonton family business since 1977. Furnaces, air conditioning, heat pumps, boilers, water heaters, plumbing and HRVs.

    View on Google
  5. Acclaimed! Heating, Cooling & Furnace Cleaning

    4.8 · 1,440+ Google reviews

    Family-owned Edmonton company since 1995. Furnaces, furnace cleaning, air conditioning, heat pumps and water heaters.

    View on Google

What a Furnace Inspection and Cleaning Costs in Edmonton

A furnace tune-up in Edmonton typically costs $100 to $200, before GST. A service call to look at a problem is $100 to $150. The fee covers the visit and the checklist, and parts and repairs found along the way are extra.

Ask what the price includes. Whether a heat exchanger inspection, a gas pressure test and a written report are part of the visit differs from company to company. Confirm before you book.

If the inspection finds something minor, such as a dirty flame sensor ($100 to $280 with the repair) or a loose connection, the technician can often fix it on the spot. A weak igniter replaced in October beats the same repair on a January night.

Inspection, tune-up or cleaning? An inspection checks and tests. A tune-up adds cleaning, usually the burners and flame sensor, plus small adjustments and a carbon monoxide check. Many companies sell them as one visit. Cleaning the heat exchanger or the ducts is a separate job, so ask for a quote if you want it.

What a Technician Checks

SystemWhat is checked
Ignition and burnersIgniter wear, flame pattern, flame sensor cleanliness
Heat exchangerA visual look for cracks and corrosion. A crack is a carbon monoxide risk
VentingFlue connections, outside pipe openings, the condensate drain on a high-efficiency unit, the chimney on an older one
BlowerWheel condition, motor draw
ElectricalWiring, capacitor, control board, limit switches
GasGas valve operation, manifold gas pressure, supply line
Filter and airflowFilter condition, return air, temperature rise
Safety controlsHigh-limit and pressure switches, carbon monoxide alarm function

Not every company uses the same checklist. The two items most worth confirming are the heat exchanger look and the gas pressure test.

What Inspections Find in Edmonton Homes

About 22% of households in the metro area live in a home built from 1981 to 2000, and about 40% in one built since 2001. Furnaces from those decades are mostly condensing units, so the usual findings are condensate drain problems, a dirty flame sensor and wear on the inducer. These are cheap to fix when caught early. Older mid-efficiency units are the ones to watch for corrosion in the heat exchanger. Edmonton's hard water, about 176 mg/L, also scales up humidifier pads, and a clogged pad is a common finding.

A cracked heat exchanger is a replacement trigger. It can let carbon monoxide into the house. If a technician finds one, ask them to show you, get a second opinion if you are unsure, and do not run the furnace until it is settled.

How Often to Book an Inspection

Once a year, in September or early October if you can. The furnace has been idle since spring, technicians have room in their schedules and you can deal with any findings before the cold arrives. Check your furnace warranty and home insurance policy as well, since either may set conditions about regular maintenance.

Buying a Home? Inspect the Furnace Separately

A general home inspection does not replace a furnace inspection. If the furnace is older than about 15 years or no one can say when it was last serviced, have an HVAC technician look at it before your conditions are removed, and ask for the findings in writing.

Ask the seller:

What a Good Report Looks Like

You should get a written summary, ideally listed by component with a condition note and a recommended action: safety concerns first, then wear worth watching, then what passed. If you receive nothing in writing, ask. A report that shows several worn items on an old furnace is often the clearest sign that replacement makes more sense than another repair. See signs your furnace needs replacing.

Ready to connect?

Find a Trusted Edmonton HVAC Company

Edmonton's top-rated home service companies - independently selected, all with 4.7+ Google ratings. No forms, no signup required.

Connect Now

Frequently Asked Questions

A tune-up is typically $100 to $200, before GST. Parts and repairs are extra, and companies differ on what the visit includes.

An inspection checks and tests the furnace. A tune-up adds cleaning of the flame sensor and burners and small adjustments. Deeper cleaning of the heat exchanger or ducts is a separate job.

Once a year. September or early October gives you time to fix anything before the cold.

That depends on the company and the furnace, so ask when you book and ask whether a written report is included.

Furnace cleaning usually comes as part of a tune-up, which covers the burners and flame sensor and typically costs $100 to $200 before GST. Cleaning the heat exchanger or the ducts is a separate job with its own quote.

See Top-Rated Companies