Troubleshooting

Leaking Water Heater in Edmonton: Fix or Replace?

A drip at a valve or fitting is a repair; water through the tank wall means a new tank. Stop the flow, then find the source.

SD Editorial
ServiceDispatch Editorial Team ServiceDispatch.ca
Written for Edmonton, AB

Take the first few minutes to stop the water, then work out where it is coming from.

Stop the Water First

  1. Close the cold water inlet, the pipe entering the top of the tank, by turning the handle clockwise. If it will not budge, close the main shutoff where water enters the house.
  2. Turn off the energy source. Flip the breaker for an electric tank. On a gas tank, set the control to off or pilot.
  3. Stay out of the puddle. The water may be scalding, and an electric tank has wiring near the floor.
  4. Clear the area of boxes and stored items, and mop up, particularly if the floor drain is far away.

Smell gas? Go outside first. Leave the building and call ATCO Gas at 1-800-511-3447 or 911.

Reading the Leak

Towel the tank and floor dry, then see where the first bead of water forms. That tells you more than where the puddle finished.

LocationLikely causeOutcome
Pipe fittings on top of the tankLoose or worn connectionRepair, typically $300 to $750+ as a leak repair
Pipe running down from the relief valveWorn valve, or pressure or temperature too highRepair
Small tap near the bottomDrain valveRepair
Seeping from the jacket or beneath, every fitting dryCorroded steel shellNew tank, typically $1,000 to $3,500 installed

Hard Edmonton Water and Rusted Tanks

EPCOR water runs about 176 mg/L hardness, and heating it deposits scale on the floor of the tank. A tank holds hot water all day, and A. O. Smith notes that sediment and corrosion collect as it ages. The anode rod exists to corrode in place of the steel, and once it is used up the tank wall begins to fail. Nobody can patch a leaking shell, whatever its age.

Suppose only a fitting is leaking but the tank has passed 10 years. Ask for a replacement price next to the repair quote. How long a hot water tank lasts in Alberta and signs your water heater needs replacing cover age, and repair or replace in Edmonton sets the options side by side.

When the Relief Valve Drips

The relief valve is the safety device on the top or side of the tank, with a short pipe aimed at the floor. A steady drip normally means it has worn out. A new valve that drips too suggests the house water pressure is to blame, and A. O. Smith says high pressure stresses a system and shortens its life. If the valve is pouring out hot water, treat it as an emergency: turn off the power or gas, close the water and call for help.

Homeowner Jobs and Licensed Jobs

Anyone can close valves, switch off power and dry the area. Replacing a gas tank is a different matter. Alberta restricts installing and replacing gas appliances to the Class B gasfitter trade, and the City of Edmonton requires a gas permit at $124.80.

What It Costs and Who to Call

Edmonton, 2026, before GST: service call $100 to $150. Gas valve or leak repair $300 to $750+. New tank installed $1,000 to $3,500.

When you phone, say where the water is, how old the tank is and what you have already switched off. Water heater repair in Edmonton lists companies. If the tank is finished, go to repair costs, replacement costs or replacement in Edmonton.

Directory · 5 companies

Top-rated water heater companies in Edmonton

Independently selected on Google rating, review volume and years in Edmonton. Every company here is rated 4.7 or higher. Tap one to open its Google listing, with phone number, hours and recent reviews.

  1. Friesen's Climate Control

    4.9 · 1,120+ Google reviews

    Family owned and operated in Edmonton since 2007. Furnaces, air conditioning, heat pumps, water heaters and HRVs.

    View on Google
  2. Otto Heating & Cooling

    4.9 · 720+ Google reviews

    Serving Edmonton since 2007. Furnaces, air conditioning, heat pumps and water heaters.

    View on Google
  3. Trust Home Comfort

    5.0 · 820+ Google reviews

    Edmonton heating and cooling company on 27 Avenue NW. Furnaces, air conditioning, heat pumps and water heaters.

    View on Google
  4. Weiss-Johnson Heating, AC & Plumbing

    4.8 · 1,940+ Google reviews

    Edmonton family business since 1977. Furnaces, air conditioning, heat pumps, boilers, water heaters, plumbing and HRVs.

    View on Google
  5. Acclaimed! Heating, Cooling & Furnace Cleaning

    4.8 · 1,440+ Google reviews

    Family-owned Edmonton company since 1995. Furnaces, furnace cleaning, air conditioning, heat pumps and water heaters.

    View on Google

Frequently Asked Questions

Possibly. Hot water scalds, and an electric tank has wiring near the floor. Shut off the supply and the power or gas before anything else.

Yes, when the drain valve is the source. No, when every fitting is dry and water seeps from the tank body. Then it needs replacing.

Not usually. Most often a connection has loosened or the relief valve has gone, and both are repairs.

The valve may have worn, or pressure or temperature may be too high. High pressure can call for a pressure-reducing valve or an expansion tank.

Yes. Leave the water and the power or gas off until you know the cause.

Typically $1,000 to $3,500 installed in Edmonton, before GST.

No. The gas connection is restricted to Class B gasfitters, so use a licensed firm.

See Top-Rated Companies